How to Use?
Spray it on coating applicator and apply evenly in straight and then horizontal direction on the surface. Later level the coating by buffing using clean and dry microfiber cloth.
Apply coating section by section and level it evenly without leaving any residue. Examine carefully for high spots.
✔Surface should be smooth and contamination free before application of coating. It is advised to first correct the surface with wavex clay bar, wavex rubbing compounds and wavex coating prep before application of product.
✔No water test or exposure of surface to water for the first 48 hrs of application.
✔Hydrophobic effect on the surface indicates the activation of coating. If you found no or low hydrophobic effect after 48 hrs. It means, coating is still not cured and need more time, might be due to low temperature outside. In this case, please wait for another 24 hrs and re-check.
✔Always close the cap tightly after use as coating may dry solid while over exposure to air.
✔Extra spray pump will be supplied along with the product as in case if coating cures in the pump can be replaced. However, it is advised to always flush out the spray pump after use for no clogging.